YMF262_devboard_Firmware/README.md

YMF-262 Firmware for Nucleo F722ZE Board and STM32F7 MCU

Building

To build a Flashable .elf file issue the following commands:

• Debug:

  cmake --preset Debug && cmake --build --preset Debug

• Release:

  cmake --preset Release && cmake --build --preset Release

Flashing:

To flash the .elf file please issue the following command:

openocd -f interface/stlink.cfg -f target/stm32f7x.cfg -c "program YMF262_Devboard_Firmware.elf verify reset exit"

Testing

The HAL logic is unit-tested on the host (x86) using GoogleTest, with a FakeGpio mock that records the GPIO operations instead of touching hardware. This verifies the YMF262 write choreography (two-cycle address/data sequence and timing) without needing the physical chip.

To build and run the tests:

	cmake -B build
	cmake --build build
	./build/run_tests```

GoogleTest is fetched automatically via CMake FetchContent on the first configure (requires internet).